Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Dallas, TX: What the Job Actually Involves
Door installation in Dallas usually takes one to two days per opening and runs $450 to $2,800 for an exterior door, or $250 to $1,200 for an interior door, depending on material, size and whether the frame gets rebuilt. The work covers pulling the old slab and frame, checking the rough opening for square and rot, setting the new unit, flashing and sealing it, and hanging the hardware so it latches clean. Call (844) 797-4808 for a free on-site estimate and a written, line-item price.
Why Dallas Homeowners Replace Doors Before Storm Season, Not After
Dallas sits in the crosshairs of spring straight-line wind and hail, and a door that’s out of square or has tired weatherstripping is the first thing to let water and pressure inside. In older Oak Cliff and East Dallas bungalows, we routinely find door frames that have racked as the Blackland Prairie clay swells and shrinks under the pier-and-beam foundation. Out in the slab-on-grade ranch tracts built from the 1950s through the 1970s, the same soil movement shows up as a front door that sticks in August and swings free in February. Replacing the door without addressing the opening is how you end up back where you started in two summers.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
What to Look For in a Dallas Door Installation
Wind-rated and impact-rated exterior doors matter here more than most homeowners realize, and the specs are what separate a door that lasts from one that leaks. When you’re comparing bids, check these:
- Door and frame rating. Exterior doors should carry a design pressure (DP) rating matched to the wind zone. A reputable installer will tell you the rating on the unit, not just the brand.
- Flashing and sill pan. Water gets in at the bottom corners. A proper sill pan and integrated flashing are non-negotiable in a city that gets hard spring storms.
- Reinforced strike plates and hinges. Long screws into the framing, not the trim. This is what keeps a door in the opening under wind load and what resists a kick-in.
- Square and plumb rough opening. They’ll check it before setting the unit. If the framing has moved with the clay, it gets corrected first.
- Permits pulled. Exterior door replacements in Dallas generally require a permit, and the inspection covers flashing and fastening. Ask who pulls it.
How We Install a Door in Dallas, Stage by Stage
Day 1, first hour: tear-out and inspection. We pull the old door, frame and trim, then check the rough opening for rot, water damage and square. On Dallas homes we often find soft framing at the threshold where water has been wicking in for years. If the framing has moved with the clay, we sister in new material before anything goes back.
Day 1, mid-morning: prep and flashing. The opening gets cleaned, the sill pan goes in, and we set the flashing detail. This is the step most cheap installs skip, and it’s the one that decides whether you get a leak in the first big storm. It takes two to three hours on an exterior door.
Day 1, afternoon: setting the unit. The new door and frame go in, get shimmed, squared and plumbed, then fastened with long screws into the framing at the hinges and strike. We check the swing and latch before moving on. The homeowner decides hinge side and swing direction at the estimate, not on install day.
Day 2 morning: sealing and trim. We foam and caulk the perimeter, reinstall interior and exterior trim, and touch up paint at the trim line. Exterior caulk and sealant get a full cure window before any weather hits.
Day 2 afternoon: hardware and walkthrough. Locksets, deadbolts, weatherstripping and thresholds get set and adjusted. We walk the door with you, check the latch, check the seal, and hand over the warranty paperwork. Most single-door jobs finish in a day and a half; a set of three or four doors runs three to four days.
The Options You’ll Choose Between
Material and configuration decisions happen at the estimate, and they drive both the look and the price. Here’s the honest trade-off on each.
- Fiberglass exterior doors. The best fit for Dallas wind and hail. They don’t dent like steel, they don’t swell and warp like wood, and they hold up to the summer heat. $700 to $2,200 installed. The trade-off is a slightly higher upfront cost than steel.
- Steel exterior doors. Strong and affordable at $450 to $1,400 installed, but they dent under hail and rust at the bottom edge if the sill pan isn’t right. Fine for a back door under a porch.
- Wood doors. Warm look and easy to repaint, $900 to $2,800 installed. The trade-off is maintenance: in Dallas humidity, a wood exterior door needs repainting every three to five years or it starts to swell at the edges.
- Impact-rated glass inserts. If the door has glass, an impact-rated insert adds $200 to $600 but keeps the opening sealed when hail or debris hits. Worth it on any front door facing an open yard.
- Interior doors. Hollow-core runs $250 to $550 installed, solid-core $450 to $1,200. Solid-core dampens sound between rooms and holds hinges better over years of use.
- Frames. A wood frame is standard; a composite or PVC frame costs $150 to $400 more but won’t rot at the threshold.
See the difference
Before
After
Before
After
Before
AfterWhat Door Installation Costs in Dallas, TX
Door installation in Dallas runs $250 to $2,800 per door depending on material, size and condition of the opening. A typical fiberglass front door with glass inserts lands around $1,400 to $2,200 installed, including the permit, flashing and trim. That’s the honest range; here’s what moves a job to the low or high end.
- Door material and grade: hollow-core interior at the low end, fiberglass or solid wood exterior at the high end.
- Condition of the opening: rotted or out-of-square framing adds $200 to $600 in carpentry to rebuild the opening.
- Configuration: a single door is straightforward; sidelights, transoms or a double-door setup push the job up $500 to $1,500.
- Hardware and finish: basic builder-grade locksets versus a matched set with a deadbolt adds $100 to $400.
- Permit and inspection: exterior door replacements in Dallas generally require a permit, and the fee is built into the written estimate.
A written estimate from us lists the door and frame, hardware, flashing, trim, permit and labor as separate lines, with the number you see being the number you pay. What’s usually not included: painting beyond trim touch-up, structural framing repair beyond the opening, and any foundation correction the door reveals. If we find a foundation issue mid-job, we stop, tell you, and price the fix before proceeding. No change orders sneaking in at the end.
What Dallas Homes Specifically Do to This Job
The Blackland Prairie clay is the thing that changes door work here compared to the Hill Country or East Texas. The expansive vertisols under Dallas swell when wet and shrink when dry, and that movement reaches the door opening through the slab or pier-and-beam foundation. We see three failure modes over and over: a front door that sticks in late summer as the clay shrinks, a back door that leaks at the threshold because the frame has racked, and weatherstripping that separates at the strike side. In the pre-war bungalows of Oak Cliff and East Dallas, original wood frames often need replacing along with the door because the framing has taken on the movement. In the slab-on-grade ranch tracts, we regularly see spring failures at thresholds where water has been pooling for a decade. If the door reveals foundation movement, we’ll flag it, and the fix often calls for an engineer’s letter tied to a foundation repair permit before the door goes back. That’s the Dallas reality, and it’s why we check the opening before pricing a single door. When the scope grows to include the whole envelope, homeowners often fold this into a full Windows & Doors in Dallas project; if you’re also fencing the yard, many pair it with a Chain Link Fence in Dallas or a Vinyl Fence in Dallas. We handle door installation across Dallas and the surrounding communities, and you can always see the wider scope on our Windows & Doors service page.
Serving Dallas, TX – Our Local Coverage Area
We serve Dallas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Door Installation in Dallas
A single door takes one to two days; a set of three to four doors takes three to four days. Exterior doors take longer than interior because of flashing, sealing and the permit inspection. Call (844) 797-4808 for an exact timeline on your job.
Exterior door replacements in Dallas generally require a permit, and the inspection covers flashing and fastening. Interior door swaps typically don’t. We pull the permit and schedule the inspection as part of the job, and it’s included in the written estimate.
Door installation in Dallas runs $250 to $2,800 per door, with a typical fiberglass front door landing at $1,400 to $2,200 installed. Framing repair, sidelights and high-end hardware push it toward the top. Call (844) 797-4808 for an exact quote; estimates are free.
Yes, in the vast majority of cases. Door replacement works within the existing opening, so plumbing and structure stay put. If the framing has rotted or the opening is out of square, we rebuild the opening only, and we tell you before any extra work begins.
Every door we install is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship on the install, flashing and hardware. The door manufacturer’s own product warranty rides on top of that.
Get Your Free Door Installation Estimate in Dallas
Here’s what happens when you call: we answer live, 24/7, ask a few questions about the door and the opening, and schedule a free on-site estimate at your convenience. You get a written, line-item price with the permit and labor included, so there are no surprises. We work across Dallas, and our technicians bring up to 12 years of experience to every job. Call (844) 797-4808 to schedule your free estimate.
Written by the team at Groundwork Construction Co.