Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Aluminum Fence in Duncanville: What It Takes and What It Costs
A residential aluminum fence in Duncanville usually runs $3,500 to $9,000, with most single-family yards landing in the $4,000 to $10,000 band once gates and removal of the old line are factored in. Plan on two to four days on site for a typical corner-lot backyard run, longer if the property needs a survey or the old fence is set in concrete footings. Call (844) 797-4808 for a free on-site estimate, and we’ll give you a written, line-item number before anyone touches a post.
How We Build an Aluminum Fence Here, Stage by Stage
The sequence matters more than the panel style you pick, because a straight, tight aluminum fence is won or lost in the layout and the footings. Here’s how the job actually runs.
1. Site walk and layout (day 1, about 1 to 2 hours)
We walk the property line with you, confirm where the fence sits on your side of the boundary, and mark post locations with string and stakes. If there’s any question about the plat, that’s when we tell you. Aluminum panels come in fixed widths, so this is the stage where you pick your post spacing and decide whether gates land on a corner or mid-run. Nothing gets cut until this is settled.
2. Demo and footing prep (day 1, half a day)
If an old wood, chain link, or rusted steel fence is coming out, we pull it, and that’s usually the slowest part in Duncanville – old posts are often set in concrete bells that have to be broken out. New holes get dug to frost depth or deeper, typically 18 to 30 inches depending on wind load and panel height. Utility locates get called before any auger turns.
3. Post setting and cure (day 1 into day 2, 24 to 48 hours of cure)
Posts go in with concrete and get plumbed and braced. We don’t hang panels the same day – wet concrete plus a North Texas wind gust is how fences go crooked. This is the one wait in the schedule, and it’s not optional. You’ll see the line take shape here and can flag anything that looks off before it’s locked in.
4. Panel and gate hang (day 2 to 3, most of a day)
Aluminum panels get set into the posts, rails leveled, and gates hung with their hardware and self-closing hinges if you chose them. Rackable panels are the reason aluminum works on Duncanville’s sloped yards – each panel tilts to follow the grade instead of stair-stepping in ugly chunks. On a corner lot, we’ll talk through road-side visibility and any setback the city cares about.
5. Walkthrough and touch-up (final day, about an hour)
We tighten hardware, touch up any scratched powder coat, clean up the site, and walk the fence with you. Our technicians have up to 12 years of experience, and every aluminum fence we install is covered by the 730-Day Done Right Promise – if a weld, a gate, or a footing isn’t right, we make it right. That’s in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
What You’re Actually Choosing Between
Aluminum isn’t one product. The choices below are the ones that change how the fence looks, how long it lasts, and what it costs.
- Residential vs. commercial grade: Residential panels are lighter and cheaper, fine for a backyard. Commercial grade runs thicker rails and heavier pickets and holds up far better on a street-facing front line or where kids and dogs lean on it. The jump is real money but it’s the difference between a ten-year fence and a twenty-year one.
- Picket spacing and style: Standard 4-inch spacing satisfies most pool codes; tighter spacing reads more private but adds pickets and cost. Flat-top, spear-top, and arched panels are the common looks – arched top runs a few hundred more per section.
- Color and finish: Powder-coated black and bronze are stock and move fastest. Custom colors in the plant cost more and add lead time. Ask about a UV-resistant finish – our Texas sun is brutal on cheap coatings.
- Gate hardware: Manual latch, self-closing, or keyed entry all get priced separately. This is where cheap bids quietly shortchange you – a gate that sags in eighteen months is almost always a hardware problem, not a panel problem.
- Racking vs. stepped panels: On Duncanville’s sloped lots, rackable panels follow the grade cleanly. Stepped panels are fine on flatter yards and cost a bit less.
What an Aluminum Fence Costs in Duncanville, TX
The working range here is $3,500 to $9,000, and $4,000 to $10,000 once you add gates and removal of an old line. Five things push that number up or down:
- Linear footage: This is the big one. A small side-yard run sits at the low end; a full backyard plus a front line on a larger corner lot hits the top.
- Existing fence removal: Concrete-set old posts mean demo labor and disposal. A clean line with no fence comes out cheaper.
- Grade and slope: Flat lots are quick. Rackable panels on a hilly yard take more layout time and more hardware.
- Gates: Each gate is its own line item – width, self-closing hinges, and keyed hardware all move the price.
- Permits and survey: If the city requires a fence permit or you need a survey to confirm the line, that’s on top.
Every written estimate itemizes posts, panels, gate count, hardware, demo, and permit. What it usually does not include: a new survey if one’s required, and landscaping put back around the new line. We tell you that upfront – the number you see is the number you pay, with no change orders dropped on you mid-job.
See the difference
Before
After
Before
After
Before
AfterWhat Duncanville Homes Specifically Do to This Job
Duncanville is a built-out, largely post-war bedroom city, and almost every fence job here is a replacement, not a new build. That changes the work. The lots across ZIP codes 75116, 75137, and 75138 are full of 1950s to 1970s brick-veneer ranch homes, and their fences have been replaced once or twice already – so we’re often pulling old concrete footings out of ground that’s shifted. The expansive black clay soil here heaves and shrinks with our wet-dry cycles, and that moves fence lines and gate posts over time. We set deeper footings and brace gates accordingly, because a gate that hangs true in April can drag by August. North Texas also throws straight-line wind and spring hail at us, and a properly braced aluminum fence handles that far better than a wooden one. If your fence is part of a full Fence Installation in Duncanville project across the whole property, we scope it that way from the start.
Serving Duncanville, TX – Our Local Coverage Area
We serve Duncanville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Aluminum Fence in Duncanville
Most residential aluminum fences here take two to four days on site, with a mandatory 24 to 48-hour cure for the post concrete in the middle. Larger corner lots or jobs that need a survey run a day or two longer. Call (844) 797-4808 and we’ll give you a schedule tied to your specific yard.
Many fences here do require a permit, especially anything street-facing or over a standard height, and we pull it and pass the inspection as part of the job. Rules can change and depend on your lot, so we confirm the requirement before we order material rather than after.
In most cases, yes – we hand-dig and locate utilities first to keep the line clear of sprinkler runs and irrigation. Pockets of established landscaping right on the property line are the one place we may need to work around, and we flag that at the site walk.
Expect $3,500 to $9,000 for a typical residential run, and $4,000 to $10,000 once gates and old-fence removal are added. Linear footage, grade, and gate count are the biggest levers. Call (844) 797-4808 for an exact quote – estimates are free.
Every aluminum fence we install is backed by the 730-Day Done Right Promise – if the workmanship isn’t right, we make it right. That covers the install, the footings, and the gate hang, not just the panels.
Ready for a Straight Answer on Your Aluminum Fence?
We’ll come out, walk your line, and hand you a written, line-item estimate for your aluminum fence in Duncanville – what’s included, what isn’t, and a realistic schedule. No pressure, no vague range. Call (844) 797-4808 and a live person answers, day or night. Homeowners often pair this with Driveway Repair & Replacement in Duncanville or Patios, Walkways & Pool Decks in Duncanville while we’re already on site. We cover all of Duncanville and nearby DeSoto, Glenn Heights, and Lancaster, and our Fence Installation service handles the rest of the property. From foundation to finish line, one contractor, one promise.
Written by the team at Groundwork Construction Co.