Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Grand Prairie, TX: What to Expect
Cabinets & countertops in Grand Prairie typically run $14,000 – $45,000 for a full tear-out and replacement, and most jobs take two to four weeks from demolition to final caulk. Cabinet installation alone sits at $4,000 – $13,000 and countertop installation at $2,000 – $6,500, so the number you land on depends on box count, material grade, and whether layout changes pull in plumbing or electrical. Call (844) 797-4808 for a free on-site estimate with line-item pricing.
How We Run a Cabinet and Countertop Job, Stage by Stage
Most contractors hand you a start date and go quiet. Here’s the actual sequence, so you know what happens on day one versus day ten and where your decisions land.
Stage 1: In-home measure and layout lock (day 0, about 90 minutes)
We laser-measure walls, check for out-of-square corners, and confirm ceiling height. Older Grand Prairie homes in 75050 and 75051 rarely have plumb walls, and that matters: out-of-square rooms mean filler strips and scribed end panels, which add cost. You decide door style, finish, and box construction here. Once you sign off, the layout is frozen.
Stage 2: Order and lead time (2 – 4 weeks)
KraftMaid and comparable semi-custom lines run 2 – 4 weeks on standard finishes and 5 – 6 weeks on painted or glazed. Stock cabinets ship in days but limit your sizes. You’ll confirm hardware pulls and any appliance specifications now, because the refrigerator and range dimensions drive the cabinet openings.
Stage 3: Demo and prep (1 – 2 days)
Out come the old boxes and tops. We protect flooring and cap plumbing. If you’re relocating a sink or range, this is when the rough-in happens, and that’s a separate trade with its own inspection on a two-county permitting schedule. You decide nothing here; we just keep you posted on what we find behind the wall.
Stage 4: Cabinet install (2 – 3 days)
Uppers go in first, then bases, then leveling and shimming. Crown and light rail are next. On a typical 20-linear-foot Grand Prairie kitchen, expect two full days for boxes and a third for trim and hardware. You approve door alignment before we template.
Stage 5: Template, fabricate, install counters (5 – 10 days)
Quartz and granite get templated after cabinets are set, then fabricated off-site. That gap is normal. Sink cutout, faucet holes, and edge profile get confirmed at template. Counter install runs one day, then 24 hours before you load them. Backsplash and final caulk close the job.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Most of the cost swing lives in three decisions: cabinet construction, door material, and countertop surface. Here’s the honest trade-off on each.
- Stock vs. semi-custom cabinets. Stock boxes are the cheapest path at the low end of the $4,000 – $13,000 range, but you’re stuck with standard widths and gaps get filled with filler strips. Semi-custom (KraftMaid territory) lets you size to the inch and pick interior organizers, at roughly 20 – 35% more.
- Plywood vs. particleboard boxes. Plywood holds screws better over decades and handles the humidity swings North Texas throws at a kitchen. Particleboard is cheaper and fine in dry, well-vented rooms, but it swells if a supply line ever leaks.
- Quartz vs. granite vs. laminate. Quartz is non-porous and needs no sealing, which suits a busy household; granite is natural stone with real variation and wants resealing every year or two. Laminate lands near the bottom of the $2,000 – $6,500 counter range but shows wear at the sink edge faster.
- Door style and finish. Painted shaker and slab doors photograph well but show chips; stained wood hides wear. Painted finishes add lead time and cost on any custom line.
- Sink and faucet upgrade. A Blanco undermount sink and a Moen or Delta pull-down faucet are the common pairing here, and both need to be on-site before template so the cutout is right.
What Cabinets & Countertops Cost in Grand Prairie, TX
Plan on $14,000 – $45,000 for cabinets and countertops together in Grand Prairie. That’s the working range for a full replacement with new boxes and stone tops. Five things push you toward the top of it.
- Linear footage and box count. A galley kitchen at 15 feet lands near the low end; an L-shaped or U-shaped layout with an island at 30-plus feet sits at the high end.
- Layout changes. Moving a sink, range, or dishwasher means plumbing and electrical rough-in plus inspection, which adds both dollars and days.
- Existing condition. Water-damaged subfloor, out-of-square walls, or a prior leveling repair on the slab all mean extra prep.
- Material grade. Semi-custom boxes and quartz push the number up; stock boxes and laminate pull it down.
- Permit scope. Straight swap-out of like-for-like cabinets often needs no permit; anything touching plumbing, gas, or wall removal does, and that’s an inspection on the books.
A written estimate from us lists cabinetry, countertops, demolition, haul-away, and installation as separate lines. What it doesn’t include unless we scope it in: appliance hookups, electrical relocation, drywall repair behind removed cabinets, and painting. We’d rather tell you now than surprise you mid-job. No-hassle upfront pricing means the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Grand Prairie Homes Specifically Do to This Job
Grand Prairie is unusual because it straddles Dallas and Tarrant counties, and that split shows up in permitting. A kitchen job near the old downtown core in 75051 or 75050 may run through one county’s inspection desk while a project out in 75054 runs through the other, and the timelines and paperwork aren’t identical. It’s one city with two code regimes, and we plan the schedule around which one your address falls under.
The bigger factor is the ground. Grand Prairie sits on Blackland Prairie’s expansive clay, some of the most aggressive foundation movement in North Texas. In mid-century ranches near the old downtown, we regularly find slab floors that have already been leveled once, and cabinets installed after a foundation repair never sit square against a wall that’s still moving. That’s why we check for cracks in the slab edge and out-of-level floors before we order a single box. A $14,000 cabinet package can be ruined by a foundation that shifts a half-inch the following spring.
The 1990s and 2010s tract homes out in 75052 and 75054 bring the opposite problem: square rooms and level floors, but cheap original boxes with worn hinges and laminate tops peeling at the sink. That’s often a straight swap with no permit, which keeps the job near the lower half of the range. Wherever you are in Grand Prairie, the housing stock tells us most of what we need to know before we walk in.
Serving Grand Prairie, TX – Our Local Coverage Area
We serve Grand Prairie and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked About Cabinets & Countertops in Grand Prairie
Most jobs take two to four weeks total, with cabinet lead time eating the largest share. Demo and cabinet install run three to five working days; the counter template-to-install gap adds another week on quartz or granite. Call (844) 797-4808 and we’ll put an actual date range on your written estimate.
Usually not, if you’re swapping like-for-like and nothing moves. Permits come into play when the job touches plumbing, gas, or electrical, or when a wall comes down, and which county’s desk handles it depends on your address. We pull the permit when one is required and get the inspection passed before final walkthrough.
Yes, and most Grand Prairie jobs we run keep the sink and range where they are. Keeping plumbing and electrical in place is the single biggest cost saver: it drops a job toward the $14,000 end instead of the $45,000 end and skips the rough-in inspection entirely. You’ll just need to size the new boxes around the existing supply lines and drain.
Our workmanship is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right, for two full years. Manufacturer warranties on the cabinets and counters pass through to you separately. That’s one of the longest workmanship guarantees in residential construction, and it covers our installation, not just the parts.
Yes. 0% financing for 18 months is available, and projects over $10,000 qualify for $1,000 off, which most full cabinet and counter jobs clear. Calls get answered by a live person 24/7, so you’re not waiting until Monday to start pricing.
Get a Free Cabinet and Countertop Estimate in Grand Prairie
Book a free on-site estimate for cabinets & countertops in Grand Prairie. We measure, check the floor and walls for foundation movement, and hand you a written line-item quote with fixed pricing. If your kitchen and bath are both due, homeowners often pair this with Walk-In Showers & Shower Remodeling in Grand Prairie or a Tub-to-Shower Conversion in Grand Prairie. Call (844) 797-4808.
If you’re weighing a cabinet swap against a wider scope, see our Kitchen Remodeling in Grand Prairie page to compare the full project. And if you’re still mapping out the whole house, our kitchen remodeling service hub covers every stage from layout to finish, while this page stays focused on the boxes and the stone.
We work all across Grand Prairie, from the older 75050 blocks near downtown to the newer builds out toward 75054, plus nearby Cedar Hill, Duncanville, Euless, and DeSoto. Background-checked, uniformed technicians handle every install, so you know who’s in your home. Built to last, backed in writing.
Written by the team at Groundwork Construction Co.