Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in Grand Prairie, TX: What It Costs and How Long It Takes
A tub-to-shower conversion in Grand Prairie typically runs $3,500 to $10,000 and takes three to seven working days once the permit clears. The job tears out the old tub and its surround, reworks the drain and valve rough-in, builds a sloped waterproof pan, sets new wall tile and a shower system, and passes inspection before the glass goes on. Call (844) 797-4808 for a free on-site estimate and a written, line-item quote before any tile is ordered.
How Our Tub-to-Shower Conversion Process Runs, Stage by Stage
Most contractors describe this job in a single paragraph. We’d rather you know what each day looks like, so you can plan around one working bathroom and make decisions at the right moment instead of at the end.
Day 1: Demo and inspection. We protect the hallway and floor, shut off the water, and pull the tub, surround, and any failing backer. On the older slab homes around 75050 and 75051, this is where we find out whether the drain and valve are where we expected. A surprise here is a conversation, not a change order, so we show you what we found before moving on.
Day 2: Rough-in and approval. We relocate the drain and valve if the layout calls for it, set the new pan or frameless receptor base, and frame any niche or bench. You approve the fixture placement at this point, because once the wall is closed up, moving a showerhead six inches becomes expensive.
Day 3: Waterproofing. We roll on the waterproof membrane and reinforce corners and the curb. This stage is invisible when the job is done and it’s the one that decides whether the shower lasts. It gets a full cure before a single tile goes up.
Days 4 – 5: Tile and trim. Wall tile, the shower floor, grout, and the valve and trim kit. You’ll have already chosen the tile and the finish at the estimate, so this is execution, not a decision point.
Days 6 – 7: Glass, inspection, and walkthrough. Glass panels or a door go in, the city inspector signs off on the plumbing work, and we walk the shower with you, run the water, and hand over the warranty in writing. Most Grand Prairie conversions finish inside a week. A job that moves a drain across the room or requires a new valve body adds a day or two.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Tub-to-Shower Choices You’ll Actually Make
The finish list is short, but each pick has a real trade-off. Here’s how we frame them with homeowners planning a conversion in Grand Prairie.
- Acrylic or composite pan vs. a tiled mud pan. A prefab pan installs in a day and costs less, which suits a rental or a quick resale. A tiled pan runs higher and takes longer, but it lets you match the floor to the walls and holds up better under daily use. On a home you plan to keep, we usually lean tiled.
- Porcelain vs. natural stone wall tile. Porcelain is the workhorse: dense, low-maintenance, and a strong fit for the humid North Texas summer. Travertine or marble looks richer, but it needs sealing and shows water spots. If the homeowners often pair this with Tile Roofing in Grand Prairie, they tend to appreciate the same low-maintenance logic inside.
- Valve and trim brand. A Moen or Delta valve with a matching trim is the dependable middle path: parts are available locally and the cartridges are easy to replace. American Standard is a solid budget choice. We list the exact model on the quote so there’s no substitution later.
- Glass: framed vs. frameless. Frameless reads cleaner and is easier to keep looking new, but it costs more and needs careful measuring. A framed enclosure is cheaper and forgiving of an out-of-square opening.
- Bench, niche, or grab bar. These add cost but matter far more than people expect. A bench and a well-placed grab bar turn a shower into one you can use safely for decades, which is the reason many Grand Prairie homeowners make the switch in the first place.
If the conversion is one piece of a larger project, it folds cleanly into Bathroom Remodeling in Grand Prairie so the plumbing, tile, and finishes are planned together.
What Tub-to-Shower Conversion Costs in Grand Prairie, TX
For a straight conversion, plan on $3,500 to $10,000. Most Grand Prairie jobs land in the $4,500 to $7,500 range. The written estimate breaks out labor, materials, permit, and disposal line by line, so you can see exactly what moves the total.
| Scope | Typical Range |
|---|---|
| Basic conversion, existing plumbing, stock pan and tile | $3,500 – $5,000 |
| Mid-grade tile, tiled pan, niche or bench | $5,000 – $7,500 |
| Frameless glass, premium tile, relocated drain | $7,500 – $10,000 |
What pushes a job toward the top of the range: moving the drain or valve, discovering water damage behind the old surround, a bigger footprint, natural stone, and a full bathroom remodel scope bundled in. What keeps it low: keeping fixtures where they are, stock materials, and a simple glass setup.
Every quote states upfront pricing with no surprises, so the number you approve is the number you pay. Included are demo, waterproofing, plumbing rough-in, tile, fixtures, permit, and haul-away. Not included: structural repairs uncovered during demo (we price those separately and get your approval first) and major layout changes that trigger a bigger permit scope.
See the difference
Before
After
Before
After
Before
AfterWhat Grand Prairie Homes Specifically Do to This Job
Grand Prairie straddles the Dallas and Tarrant county line, which means the same conversion can fall under two different permitting and inspection regimes depending on which side of the city the house sits. Before we pull a permit, we confirm which jurisdiction covers the address. On top of that, the Blackland Prairie’s expansive clay soils move a lot, so we check the shower pan and floor for deflection and settle before waterproofing. A shower built on a floor that’s already moving will leak, no matter how good the tile is.
The housing stock drives the work too. In the mid-century ranches and post-war homes around the old downtown core and ZIPs 75050 and 75051, we regularly find original cast-iron drains that are ready to fail, and slab floors that have moved enough to throw a pan out of level. In the 1990s-to-2010s tract subdivisions out in 75054, the drains are usually fine and the job is mostly finish work. Same service, two very different jobs. We cover all of it across Grand Prairie, and our Bathroom Remodeling service handles the wider scope when a conversion turns into a full remodel.
Serving Grand Prairie, TX – Our Local Coverage Area
We serve Grand Prairie and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Tub-to-Shower Conversion in Grand Prairie
Most conversions take three to seven working days from demo to final inspection. The permit and inspection step can add a few days on top depending on scheduling, so plan on the bathroom being out of use for roughly one to two weeks total. Call (844) 797-4808 and we’ll give you a realistic start date.
Yes. Because the job involves plumbing changes, a permit is generally required, and the rules depend on whether your address is in the Dallas or Tarrant county portion of the city. We confirm the jurisdiction and pull the permit for you, and we schedule the inspection. Call (844) 797-4808 to find out what your address needs.
In most cases, yes. Keeping the drain and valve where they are is what keeps the job closer to the $3,500 end. If the layout needs a relocated drain or a center drain instead of a tub drain, the rough-in cost rises. We confirm that at the estimate, before any work starts.
Expect $3,500 to $10,000 for the conversion, with most jobs landing between $4,500 and $7,500. The final number depends on tile grade, glass, whether you add a bench or niche, and any water damage we find behind the old tub. Call (844) 797-4808 for an exact quote; estimates are free.
Every conversion is backed by our 730-Day Done Right Promise. If anything isn’t right within that window, we make it right. That covers the workmanship and waterproofing, and it’s given to you in writing at the walkthrough.
Get a Free Estimate for Your Tub-to-Shower Conversion
Call (844) 797-4808 and we’ll set a time to walk your bathroom, check the drain and floor, and hand you a written, line-item estimate for your Grand Prairie conversion. Calls are answered by a live person, 24/7. If you’re also planning roof work, our team handles Metal Roofing in Grand Prairie in the same visit. Upfront pricing, no surprises, background-checked technicians. From foundation to finish line.
Written by the team at Groundwork Construction Co. of Dallas.