Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Cedar Hill, TX: What It Takes and What It Costs
Walk-in showers & shower remodeling in Cedar Hill typically runs $9,000 – $28,000, with most curbless or low-threshold installs landing in the $11,000 – $18,000 middle. A straight shower replacement runs $3,000 – $8,500, and a walk-in shower installation on its own is $4,500 – $12,000. The work itself takes 2 to 4 weeks once demolition starts, and longer if we’re relocating a drain or running a new valve. Call (844) 797-4808 to schedule a free on-site estimate.
How we actually build a walk-in shower, start to finish
Every Cedar Hill shower job follows the same five stages. Here’s what happens and when, so you know what you’re signing up for.
Stage 1: Measure, scope, and material selection (week 1)
We measure the existing pan, check the subfloor and framing, and confirm whether the drain can stay where it is. This is where you pick tile, glass, and fixture finish. If the tile is a special order, expect a 2 – 3 week lead time before demo day. Decide now, not later; mid-job changes are the single biggest cause of blown schedules.
Stage 2: Protection and demolition (days 1 – 2)
We mask the rest of the bathroom and lay floor protection before a hammer swings. Demo removes the old surround, pan, and any tile backer, and we haul it out the same day. If there’s hidden water damage behind the wall, this is where we find it, and we show you photos before quoting the repair.
Stage 3: Rough-in plumbing and framing (days 3 – 5)
New valve, drain relocation if needed, and blocking for grab bars or a bench. This is the one stage that requires a permit inspection in most Cedar Hill jobs, and we schedule the city inspector to sign off on the rough-in before anything gets closed up. We pull the permit and coordinate the inspection; you don’t chase it.
Stage 4: Waterproofing and tile (days 6 – 14)
We build the pan with a proper sloped mortar bed or a bonded waterproofing membrane, then flood-test it. Then backer board, membrane, and tile. Grout and seal come after the tile cures. This is the slowest stage and the one you can’t rush; a shower that leaks is a shower you redo.
Stage 5: Glass, fixtures, final inspection (days 15 – 20)
Tempered glass panels or a frameless door go in last, along with the showerhead, valve trim, and any niche shelving. We run the shower, check the drain and slope, and walk you through the finished product. Final inspection follows, then you get the workmanship paperwork and warranty terms in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between, and what each one actually costs you
A walk-in shower isn’t one product; it’s a stack of decisions. Here’s the honest trade-off on each.
- Tile vs. acrylic surround: Tile (porcelain or ceramic) gives you the look, lasts decades, and runs $3,000 – $7,000 in material and labor for a standard shower. Acrylic panels cost less and go up fast, but they scratch, yellow over time, and can’t be repaired the way tile can. On a resale-minded Cedar Hill home, tile wins.
- Frameless glass vs. framed: Frameless tempered glass is the look most buyers want and runs $1,200 – $3,500 depending on size and hardware. Framed glass is cheaper but collects grime in the tracks. If you’re going frameless, budget for a quality hinge and seal.
- Curbless vs. low-threshold: Curbless showers are beautiful and aging-in-place friendly, but they require the floor to be recessed or built up, which adds framing and waterproofing work, often $1,500 – $3,000 more. A low 4-inch curb is a budget-friendly compromise.
- Fixtures: We install Moen and Delta valves and trim because parts are stocked everywhere and the cartridges are serviceable 10 years down the road. Cheap no-name fixtures fail first and are hard to source replacements for.
- Niches, benches, and grab bars: Each add-on is a small line item ($200 – $800) but adds real function. Grab bar blocking is free if we frame it in during stage 3; it’s expensive later.
What Walk-In Showers & Shower Remodeling costs in Cedar Hill, TX
Plan on $9,000 – $28,000 for walk-in showers & shower remodeling in Cedar Hill. A straight shower replacement is $3,000 – $8,500, a walk-in shower installation is $4,500 – $12,000, and a tub-to-shower conversion is $3,500 – $10,000. The spread is driven by five things:
- Shower size: A 36×48 alcove is the baseline. A 5×6 walk-in with a bench pushes the top of the range.
- Existing condition: Rotted subfloor, failed pan, or missing wallboard adds $800 – $2,500 in repair.
- Moving plumbing or structure: Relocating a drain adds $1,200 – $3,000. Relocating a wall or adding framing adds more.
- Material grade: Imported mosaic tile and custom glass at the high end; standard porcelain and framed glass at the low end.
- Permit scope: A permit and inspection add a few hundred dollars and a week to the schedule, but skipping it can cost you at resale.
Your written estimate is line-itemed. What’s included: demo, haul-away, substrate, waterproofing, tile, fixtures, glass, and labor. What’s typically not included: hidden water damage discovered mid-job (quoted separately with photos), and permit fees if the scope requires one; we’ll tell you upfront whether it does.
See the difference
Before
After
Before
After
Before
AfterWhat Cedar Hill homes specifically do to this job
Cedar Hill is a hilly, tree-covered city, and that matters more than you’d expect inside a shower. Most of the homes we work on here are single-family builds from the 1980s through the 2000s in subdivisions off Belt Line and Wintergreen, plus older ranch homes in the original townsite. Expansive clay soils shift seasonally, and that movement shows up as cracked shower pans, hairline cracks in tile, and doors that stop closing square. If your shower pan is cracked on a north-facing wall, we check the foundation before we rebuild it, because tiling over a moving floor is money thrown away.
On the west side near Joe Pool Lake, we’ve opened subfloors to find limestone a few feet down, which changes how we handle drain rough-in and framing. East-side lots with mature oaks often need tree-protection planning before any exterior work. In summer, the heat and dust require morning-only demo and staged material deliveries. Spring and fall are the easiest windows to schedule, and if you’re planning this alongside other exterior work, homeowners often pair this with Roof Replacement & Installation in Cedar Hill. If you’re considering a bigger upgrade, this is often part of a full Bathroom Remodeling in Cedar Hill.
Serving Cedar Hill, TX – Our Local Coverage Area
We serve Cedar Hill and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Walk-In Showers & Shower Remodeling in Cedar Hill
Most projects finish in 2 to 4 weeks, with tile shower builds trending toward the longer end. Expect about three weeks for a standard 36×60 tile shower with glass; add a week if you’re relocating a drain or going curbless. Special-order tile can add 2 – 3 weeks before demo even starts. Call (844) 797-4808 to schedule an estimate and we’ll map out a realistic calendar for your home.
Yes, when the work involves plumbing rough-in, moving the valve, or relocating the drain, which most shower remodels do. A pure cosmetic tile replacement over an existing sound pan may not need one. We’ll tell you upfront whether your scope needs a permit, and we pull it and coordinate the inspection.
Yes, and that’s the most common path. If the drain location and valve wall stay put, we demo, waterproof, tile, and install new glass on the original footprint. That keeps you in the $9,000 – $14,000 range and shaves a week off the schedule. If your plumbing is undersized or the layout isn’t working, we’ll show you the numbers for relocating before you commit.
Plan on $9,000 – $28,000 for the main scope, with hidden water damage typically adding $800 – $2,500. We don’t quote phantom repairs, and we don’t hide them in the bid; if we find rot or a failed subfloor, you get photos and a written addendum before we proceed. Call (844) 797-4808 for an exact quote – estimates are free.
Every shower we build is covered by the 730-Day Done Right Promise: if it isn’t done right, we make it right. That covers workmanship issues like waterproofing failure, improper slope, and installation defects, plus the manufacturer’s warranty on valves, trim, and glass. We put the terms in writing before work begins, so you’re not reading fine print after the fact.
Schedule a free walk-in shower estimate in Cedar Hill
Call (844) 797-4808 for a free on-site estimate on walk-in showers & shower remodeling in Cedar Hill. A person answers around the clock, and we book the visit at a time that works for you. We measure the space, walk through your tile and glass options, and hand you a line-itemed written quote with the 730-Day Done Right Promise behind it. No pressure and no surprises. Our technicians have up to 12 years of experience on showers like yours, and we cover Cedar Hill and nearby DeSoto, Glenn Heights, Grand Prairie, and Duncanville. If you’re also thinking about exterior work, Metal Roofing in Cedar Hill pairs well with a bathroom refresh. For the wider scope, see our Bathroom Remodeling service.
Written by the team at Groundwork Construction Co.