Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in Lancaster, TX: What It Takes and What It Costs
A tub-to-shower conversion in Lancaster, TX typically runs $3,500 – $10,000 and takes about 5 to 10 working days from demo to final caulk, depending on whether the drain and valve stay where they are. In most 75146 homes the plumbing can stay put, which keeps the job on the low end and lets us finish in a single visit schedule instead of two. Call Groundwork Construction Co. at (844) 797-4808 and we’ll price your exact tub footprint before anyone swings a hammer.
How a Tub-to-Shower Conversion Actually Runs, Stage by Stage
Most homeowners expect a week of chaos. The reality is a tight sequence where the decisions happen early and the dust is short-lived. Here’s how we run it in Lancaster.
Stage 1 – Measure and lock the plan (day 1)
We measure the existing tub alcove, check the drain location, and confirm the wall studs behind the surround. You decide the shower footprint, the pan type, and the wall finish during this visit, because everything downstream depends on it. If the tub sits on a slab rather than a raised floor, we confirm the drain can be relocated before we promise anything.
Stage 2 – Demo and rough-in prep (days 1 – 2)
Out comes the tub, surround, and any failing backer. On a typical Lancaster hall bath this is a half-day of demo. If the valve or drain is moving, the rough plumbing and any electrical for a new fan or light happen here, and this is the piece that triggers an inspection.
Stage 3 – Inspection and waterproofing (days 2 – 4)
Rough plumbing and electrical get inspected before anything gets closed up. Then we hang cement backer, tape and mud the seams, and apply the waterproof membrane. This stage is invisible in the finished product and it’s the one that decides whether the shower holds for 20 years or leaks in year four.
Stage 4 – Tile, pan, and fixtures (days 4 – 8)
Wall tile, the pan or liner, the curb, the niche, and the trim go in. Glass and the showerhead, valve trim, and drain cover follow. You confirm grout color and glass style before this stage so nothing sits waiting on a special order.
Stage 5 – Final inspection and walkthrough (days 8 – 10)
We flood-test the pan, run the valve hot and cold, check the caulk lines, and walk the job with you. Anything that needs a touch-up gets scheduled before we call it done. The whole thing sits behind the 730-Day Done Right Promise, so if it isn’t done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the money in a tub-to-shower conversion moves on four decisions. Here’s what each one actually buys you.
- Shower pan: tile vs. pre-formed acrylic. A tile pan is the premium look and lets you match the floor to the walls, but it costs more and depends entirely on the waterproofing underneath. An acrylic or fiberglass pan is faster, lighter on the budget, and easier to keep clean, though it won’t match a custom tile wall as cleanly.
- Wall finish: ceramic, porcelain, or large-format. Ceramic is the budget workhorse and holds up fine in a hall bath. Porcelain costs a bit more and shrugs off moisture better. Large-format tile means fewer grout lines and less scrubbing, but the flat walls behind it have to be dead level, which can add prep time.
- Glass: framed, semi-frameless, or frameless. Frameless is the cleanest sightline and the easiest to squeegee. A framed unit costs less and takes more abuse in a busy family bath. Either way, confirm the hinge side and swing before the tile goes up.
- Valve and trim. Replacing the mixing valve is cheap insurance while the wall is open. Kohler trim is a common pick for durability and parts availability, and you’ll want to match the finish to the rest of the bath.
- Niche and bench. A recessed niche adds useful storage for almost nothing if it’s framed in before backer goes up. A bench eats floor space but matters if the shower is going to serve an older parent or anyone who needs to sit.
If the shower is one piece of a broader project, homeowners often fold the glass and tile work into Bathroom Remodeling in Lancaster so the whole bath gets planned together.
What Tub-to-Shower Conversion Costs in Lancaster, TX
Plan on $3,500 – $10,000 for a tub-to-shower conversion in Lancaster, with most hall baths landing near $5,000 – $7,500. A small shower replacement in the same footprint can come in lower, closer to $3,000 – $8,500, while a walk-in shower with a relocated drain and glass enclosure pushes toward the top of the range at $4,500 – $12,000. Here’s what moves the number:
- Footprint and drain location. Same-footprint conversions stay cheap. Moving the drain across a slab means cutting concrete, which is the single biggest swing.
- Existing condition. A tub that was set over rotten subfloor or a failing valve turns a two-day demo into a repair job.
- Material grade. Ceramic and acrylic sit at the bottom; porcelain large-format tile and frameless glass sit at the top.
- Plumbing and electrical scope. New fan, new light, or a valve swap all add labor and, in some cases, an inspection.
- Permit scope. Moving plumbing or electrical requires a permit and inspection. Cosmetic-only swaps usually don’t.
Your written estimate is line-item and upfront. The number you see is the number you pay. What’s typically not included: hidden water damage behind the old surround, structural rot, or anything that surfaces once the wall is open. We flag those the moment we find them and quote them before we proceed.
See the difference
Before
After
Before
After
Before
AfterWhat Lancaster Homes Specifically Do to This Job
Lancaster sits at the fast-growing southern edge of Dallas County, where former ranch and farmland on the I-35E corridor is being converted into new subdivisions even as older 75146 blocks hold mid-century homes. That split matters for a tub-to-shower conversion. In the older postwar houses near the historic downtown core, we routinely open a wall and find 40-year-old galvanized supply lines or a cast iron drain that’s scaled shut, and those get replaced while the wall is open rather than later. On the outer growth corridor, newer tract builds mean PEX and slab-on-grade, which changes the drain math if you want the shower to move. Lots on former farmland can still carry old agricultural drainage and septic records that predate the neighborhood, so we verify before we cut slab. North Texas blackland prairie clay works the slab year-round, and a shower pan that isn’t set correctly will show it as a hairline crack within a couple of wet-dry cycles. Working across Lancaster means we’ve seen the failure modes on both ends of that housing stock.
Serving Lancaster, TX – Our Local Coverage Area
We serve Lancaster and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Tub-to-Shower Conversion in Lancaster
A tub-to-shower conversion in Lancaster typically takes 5 to 10 working days, with same-footprint jobs finishing closer to 5 and jobs that relocate the drain running longer. The demo itself is usually a single day; the bulk of the time is waterproofing, tile set, and cure time between stages. Call (844) 797-4808 and we’ll give you a firm schedule with your estimate.
It depends on scope. A cosmetic swap that keeps the existing drain and valve usually doesn’t need one; moving plumbing or electrical, or replacing the pan, typically does. We confirm the requirement on your specific job before we start, and we pull the permit and handle the inspection when it applies. Call for an exact answer on your bath.
Yes, and most Lancaster conversions do exactly that. If the drain and valve stay in place and the alcove is a standard 60-inch tub, the shower goes into the same footprint with no concrete work and no framing changes. Moving either one is what pushes the job to the high end. Call (844) 797-4808 and we’ll tell you which camp your bath lands in.
The range in Lancaster is $3,500 – $10,000, with most jobs landing around $5,000 – $7,500. The price depends on footprint, drain location, material grade, and whether plumbing or electrical moves. Your written estimate is line-item and upfront, so there are no change orders hiding in the weeds. Call (844) 797-4808 for an exact quote, and remember there’s $1,000 off projects over $10,000 plus 0% financing for 18 months.
Every tub-to-shower conversion we do is covered by the 730-Day Done Right Promise: if it isn’t done right, we make it right, for two full years. That covers our workmanship, not just the materials. If the shower leaks or a tile pops, we’re the ones who come back.
Get Your Free Tub-to-Shower Conversion Estimate in Lancaster
Call (844) 797-4808 to schedule a free on-site estimate for a tub-to-shower conversion in Lancaster. A live person answers around the clock, and on the call we’ll set a time to measure your tub alcove, talk through pan and tile options, and put a line-item price in writing before any work starts. Our technicians have up to 12 years of experience and arrive background-checked and in uniform. No pressure, no surprises, just a real number for your bath.
Written by the team at Groundwork Construction Co. of Dallas.