Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
What a wood fence costs in Dallas, TX, and how long the build takes
A new wood fence in Dallas typically runs $3,500 to $9,000, with most residential privacy fences landing in the $4,800 – $7,200 range depending on linear footage, height, and wood grade. A standard 150 – 200 linear foot cedar privacy fence is a two-to-three day job once materials are on site. Call (844) 797-4808 and we’ll walk your property line with you and put a real number in writing, not a range.
How we build a wood fence in Dallas – start to finish
Every stage below has a decision point for you. We don’t move to the next one until you’ve signed off on it.
Day 1, first half: layout and utility locate
Before anyone digs, we call 811 for utility marking and walk the line with you, staking corners and gate posts so you can see exactly where the fence lands and how much yard you keep on each side. This is where property-line questions get settled. In Dallas, shared-line fences between neighbors are common, and the survey matters more than people expect.
Day 1, second half: demo and post setting
Old fencing comes down and hauls off. We dig post holes on 8-foot centers, set posts in concrete, and check plumb on every one. On the Blackland clay this city sits on, posts get deeper than most crews go by default. That’s a call we make in the field, and it’s why fences here that were set shallow lean within a few seasons.
Day 2: rails, pickets, and gates
Stringers go up, then pickets, then the gate frames. You’ll picket-to-the-good-side or alternate the pickets, and that choice comes up before we cut the first board. Gate hardware gets set with the swing direction you want and a latch that actually closes flush in summer heat and winter cold.
Day 2 or 3: stain decision and final walk
New cedar needs a few weeks to dry before stain, so we hand you a stain window rather than promise a same-week finish. We do a full walk with you, check every post and gate, and close out the 730-Day Done Right Promise in writing. If a post settles or a gate sags inside that window, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The wood fence options you’ll actually choose between
Most of the cost swing on a Dallas wood fence comes down to three decisions. Here’s the honest trade-off on each.
- Cedar vs. pressure-treated pine: Cedar costs 15 – 25% more upfront, resists rot and insects on its own, and holds stain far better through Dallas’s humid summers. Treated pine is the budget pick and works fine if you’re willing to re-stain every two to three years.
- 6-foot privacy vs. 4-foot or 8-foot: 6-foot is the Dallas standard and what most HOAs in the area expect. 8-foot gives real privacy but adds material, wind load, and post depth. 4-foot is common for front-yard decorative runs and shared side lines where a neighbor wants light.
- Dog-ear, flat-top, or cap-and-trim: Dog-ear pickets are the classic look and the cheapest to build. Flat-top with a cap rail reads more finished and holds up better to wind-driven rain at the top edge.
- Board-on-board vs. butted: Board-on-board (overlapping pickets) costs more but closes the gaps that butted pickets leave, which matters for privacy and for hiding a fence line from neighbors.
What a wood fence costs in Dallas, TX
Plan on $3,500 to $9,000 for a wood fence in Dallas. Here’s roughly where the number lands:
- Basic treated-pine privacy, 100 – 150 linear feet: $3,500 – $5,200
- Cedar privacy, 150 – 200 linear feet, 6-foot: $5,500 – $7,800
- Cedar with board-on-board and a cap rail, 200-linear-foot range: $7,500 – $9,000
- Gate install with hardware: roughly $300 – $600 per gate, depending on width and hardware
What pushes a job to the low end: short runs, straight lines, no demo, treated pine, and clear access. What pushes it to the high end: tear-out of an existing fence, tight side yards, corner gates, cedar on a long run, and slope that needs stepped panels. What’s included in our written estimate: demo and haul-off, materials, concrete-set posts, gate hardware, and the workmanship promise. What’s typically not: the utility locate fee if your city charges one, stain (usually a separate job), and any changes you make after the layout is staked.
Every estimate is itemized, and the number you see is the number you pay. No change orders for things we should have priced the first time.
See the difference
Before
After
Before
After
Before
AfterWhat Dallas homes specifically do to a wood fence job
Dallas sits on Blackland Prairie clay, the expansive vertisols that swell when wet and shrink hard in a dry summer. That soil movement is the reason a builder who sets posts at code-minimum depth on this ground will hand you a fence that leans and separates within a few seasons. We design for it: deeper posts, proper concrete, and gates framed to handle seasonal ground shift. The payoff is a fence that stays plumb when the clay does what Blackland clay always does. If your project grows into a full property update, it’s often built alongside our Fence Installation in Dallas scope, and homeowners frequently pair a new fence with a refreshed front approach, like Paver Driveways in Dallas or Concrete Driveways & Concrete Work in Dallas.
Housing stock matters too. In Oak Cliff and East Dallas, the pre-war bungalows often have older pier-and-beam setbacks where a fence line follows an original survey that doesn’t match today’s plat. In the slab-on-grade ranch tracts and the newer infill around the city, HOA rules govern fence height, material, and even which side the pickets face. We check your HOA packet before layout, so you’re not pulling a fence down because a neighbor’s association objected. That’s part of how we work Dallas properties, and it’s the same discipline behind our Fence Installation service across the city.
Serving Dallas, TX – Our Local Coverage Area
We serve Dallas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – wood fence in Dallas
Most Dallas wood fences are a two-to-three day build once materials land. Layout, utility locate, and demo take day one; posts go in the same day; rails, pickets, and gates finish on day two or early day three, weather permitting. Call (844) 797-4808 and we’ll give you a realistic window for your lot.
Most residential wood fences here don’t require a separate building permit, but they’re often subject to HOA approval and setback rules that vary by neighborhood. We walk you through what your HOA expects and confirm with the city where required before we build.
Yes, if the posts are set deep enough for the Blackland clay. On expansive soil, shallow posts lean and gates rack within a few dry summers. We set every post deeper than code minimum and concrete-set them, which is what makes a fence in Dallas last instead of sagging.
A wood fence in Dallas typically runs $3,500 to $9,000, with a 150 – 200 foot cedar privacy fence usually landing between $5,500 and $7,800. Call (844) 797-4808 for an exact quote – estimates are free and itemized.
Every wood fence we build is covered by the 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space. That covers settling posts, sagging gates, and workmanship issues for two full years. Call (844) 797-4808 to schedule your free estimate.
Get a wood fence quote in Dallas
A free on-site estimate means we walk your property, stake the line, and hand you an itemized number with the range already narrowed. Call (844) 797-4808 and a live person picks up, day or night. Bring your HOA rules if you have them. Reach us through Fence Installation in Dallas or by phone and we’ll put a walkthrough on the calendar.
Written by the team at Groundwork Construction Co.