Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vinyl Fence in Farmers Branch, TX: What It Costs and How Long It Takes
A vinyl fence in Farmers Branch typically runs $3,500 to $9,000 for a standard residential run, and most jobs are finished in two to four working days once materials are on site. That covers posts set in concrete, panels, caps, and gates. The number moves with linear footage, fence height, and how much old fence has to come out first. Call (844) 797-4808 for a free on-site estimate with a written line-item quote.
How a Vinyl Fence Goes In, Stage by Stage
Every vinyl fence job we run in Farmers Branch follows the same five-stage sequence. Here’s what actually happens, and what you’ll be deciding and when.
Stage 1: On-site measure and layout (day 1, about 60 – 90 minutes)
We walk the property line with you, measure the total run, and flag anything that changes the plan: a slope in the yard, an existing concrete mow strip, a sprinkler line buried near the fence line, a shared property line with a neighbor. You decide the fence height (most homeowners here go 6 feet for backyard privacy, 4 feet in front), the panel style, and where the gates land. This is also when we confirm the property line, because setting posts on the wrong side of it is the one mistake that’s expensive to undo.
Stage 2: Permits and HOA check (day 1 to day 5, depending on the city)
Most residential vinyl fence installations in Farmers Branch require a permit, and the city reviews fence height and setback from the property line. If your subdivision has HOA rules on fence style or color, we get that approval in writing before anyone digs. You’ll sign off on the final layout and the material order at the end of this stage. Nothing gets ordered until you’ve approved the quote, and the quote doesn’t change after that.
Stage 3: Demo and prep (day 1 of construction, 3 – 6 hours)
Old fence and posts come out, concrete footings get broken up and hauled off, and the line gets cleared and graded where needed. On a typical Farmers Branch lot with an aging wood fence, this is the slow part, because old posts are often set in bell-shaped concrete that has to be dug out by hand near buried utilities. We call 811 before any digging, no exceptions.
Stage 4: Posts, panels, and gates (days 2 – 3, the bulk of the work)
Posts go in first, set in concrete and left to cure. Then panels drop in, rails and caps go on, and gates get hung and adjusted so they swing clean and latch without a fight. A 150-foot run typically takes two full days at this stage. You’ll want to be around for the gate check, because that’s the one part of a vinyl fence you’ll touch every day.
Stage 5: Final walkthrough and cleanup (day 3 or 4, about 30 minutes)
We walk the full line with you, check plumb and level on every post, confirm gate hardware, and haul off all debris. Any punch-list items get handled before we leave. The whole job is covered by our 730-Day Done Right Promise – if something isn’t right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Vinyl Fence Options You’ll Actually Choose Between
Vinyl isn’t one product. The choices below are the ones that change both the price and how the fence holds up in North Texas sun.
- Panel style: privacy vs. picket vs. ranch rail. A solid privacy panel (tongue-and-groove or board-on-board look) is the most common choice for backyard runs and the most expensive per foot. Picket and ranch-rail styles use less material and cost less, but they don’t block sightlines. Pick privacy if the fence is doing a job; pick rail if it’s just marking a line.
- Color-through vs. laminated vinyl. Color-through vinyl is the same color all the way through the material, so a scuff or a weed-whacker hit doesn’t show white underneath. Laminated vinyl has a thin color layer over a white core and costs less – fine for a front fence, riskier on a backyard line where a trimmer runs along it every week.
- Post reinforcement. Standard posts are hollow vinyl over a wood or steel insert. On a long run with wind exposure, steel-reinforced posts and a heavier wall thickness are worth the upcharge; the fence stays straight instead of leaning after a few summers.
- Height and gate count. 6-foot is standard, 8-foot is available but needs a permit conversation and heavier posts. Each walk gate adds cost, and a double drive gate adds more because it needs a heavier frame and drop rod.
- Concrete vs. gravel-set posts. Concrete-set posts are the norm here because of the clay soil, and gravel-set is a cost-saving option only where the ground is stable. We’ll tell you which one your lot actually supports.
What a Vinyl Fence Costs in Farmers Branch, TX
Expect $3,500 to $9,000 for a typical residential vinyl fence in Farmers Branch. That’s the honest range, and the low and high ends are explained by the variables below.
| Line item | Typical range |
|---|---|
| Full vinyl fence installation (standard lot) | $3,500 – $9,000 |
| Old fence removal and haul-off | $400 – $1,200 |
| Walk gate (single) | $250 – $600 |
| Double drive gate | $700 – $1,600 |
| Permit and inspection fees | $150 – $450 |
What pushes a job toward the high end: total linear footage (a 200-foot run costs meaningfully more than a 100-foot run), 8-foot height instead of 6, color-through vinyl instead of laminated, steel-reinforced posts, and a lot with significant slope or old concrete footings to break out. What keeps it low: a short run, a front-yard picket or rail style, and a clean line with no old fence to remove.
A written estimate from us lists panels, posts, caps, concrete, gates, hardware, removal, and permit fees as separate line items. What it doesn’t include unless we quote it: property line survey work (if a line is genuinely in dispute, you’ll need a surveyor), HOA application fees, and any landscaping repair beyond basic grading. Upfront pricing means the number you see is the number you pay – no change orders discovered mid-job.
See the difference
Before
After
Before
After
Before
AfterWhat Farmers Branch Homes Specifically Do to This Vinyl Fence Job
Farmers Branch is a built-out inner-ring suburb, which changes how fence work goes here. There’s almost no new residential land, so most of what we install is replacement – an old wood or chain-link fence coming down and vinyl going up on the same line. That means the footing work matters as much as the panels, because we’re digging out decades-old concrete in tight side yards between ranch homes built in the 1950s through the 1970s.
The soil is the other factor. Blackland Prairie clay under Farmers Branch swells and shrinks hard between dry summers and wet springs, and that movement is what pushes fence posts out of plumb over time. We set posts deeper and use concrete footings sized for that movement rather than the minimum, because a vinyl fence that starts leaning in year three is a redo, not a repair.
Permitting is real here too. The city enforces codes closely on older properties, so fence height and setback get reviewed, and an unpermitted fence can become a problem at resale. We pull the permit and pass the inspection as part of the job. Around the southern edge, where Farmers Branch blends into the Brook Hollow and Marsh Lane area of Dallas, we regularly see shared property lines that need confirming before a single post goes in.
If the vinyl fence is part of a full Fence Installation in Farmers Branch project that also touches gates or a front-yard run, we’ll scope it together. Homeowners often pair this with Asphalt Driveways & Resurfacing in Farmers Branch or Driveway Repair & Replacement in Farmers Branch while the equipment is already on site. Our broader fence installation service covers every material if vinyl isn’t the right call for your lot, and you can see the full Farmers Branch service area for what else we handle.
Serving Farmers Branch, TX – Our Local Coverage Area
We serve Farmers Branch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Vinyl Fence in Farmers Branch
Most vinyl fence jobs in Farmers Branch take two to four working days once materials arrive, plus one to two weeks for the permit. A short run under 100 feet can wrap in two days; a 200-foot run with multiple gates takes closer to four. Call (844) 797-4808 for a schedule estimate based on your actual property.
Yes, most residential vinyl fence installations in Farmers Branch require a permit, and the city reviews fence height and setback from the property line. We handle the permit application and the inspection as part of the job, so you’re not chasing paperwork. Call (844) 797-4808 and we’ll confirm what your specific lot requires.
In most cases yes, but not always. A vinyl fence needs posts set in concrete roughly every 8 feet, so the yard gets disturbed along that line regardless. If a sprinkler line, gas line, or irrigation main runs directly on the fence line, we call 811 and adjust post placement or hand-dig around it. Call (844) 797-4808 and we’ll flag any buried conflicts during the free estimate.
A vinyl fence in Farmers Branch typically runs $3,500 to $9,000, with the final number driven by linear footage, height, panel style, gate count, and old fence removal. Color-through vinyl and steel-reinforced posts push toward the high end. Call (844) 797-4808 for an exact quote – estimates are free and written line by line.
Every vinyl fence we install is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it’s in writing. Call (844) 797-4808 to talk through what the promise covers for your project.
Get a Free Vinyl Fence Estimate in Farmers Branch
We’ll come out, measure the run, check the soil and the old footings, and hand you a written line-item quote with no surprises. The estimate is free, and the call is answered by a live person, 24/7 – no voicemail. Financing is available at 0% for 18 months, and projects over $10,000 get $1,000 off. Call (844) 797-4808 to schedule your free on-site estimate.
Written by the team at Groundwork Construction Co.