Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in Irving, TX: What It Costs and How Long It Takes
Metal roofing in Irving typically runs $15,000 – $40,000 for a full residential install, and most single-family homes finish in 3 – 6 days once materials are staged. The job is a tear-off and re-cover of your existing roof with a standing-seam or metal panel system, sized and fastened for North Texas wind loads. Call (844) 797-4808 for a free on-site estimate with a written line-item quote.
How a Metal Roofing Job Actually Runs, Stage by Stage
We give you this sequence so you know what to expect on day one, not after the crew shows up. Plan for a pre-install walkthrough, then a tight demo-and-install window, then a final inspection.
Stage 1: On-site estimate and measurement (1 – 2 hours). We measure roof planes, pitch, valleys and penetrations, check deck condition and attic ventilation, and photograph problem spots. You decide the panel style and color at this point, because panel profiles drive the order lead time.
Stage 2: Permit and material order (1 – 3 weeks). We pull the Irving permit and order panels cut to length. Standing-seam panels are formed to your roof’s exact dimensions, so lead time is real. This is when you lock finish, gauge and trim color.
Stage 3: Tear-off and deck prep (1 – 2 days). The old shingles come off, the deck gets inspected and any soft or rotted sheathing is replaced. Underlayment and ice-and-water shield go down at valleys and eaves. You approve any deck repair found at this stage before we continue.
Stage 4: Panel install and flashing (2 – 4 days). Panels go up, fastened per the wind-uplift spec for your exposure. Ridge, hip, valley and penetration flashing get installed, then the crew seals and checks every seam. You get a walkthrough of the finished roof.
Stage 5: Final inspection and cleanup (same week). The Irving inspector signs off, magnet sweep clears nails from the yard, and you receive the warranty paperwork. Our 730-Day Done Right Promise backs the workmanship.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Metal Roofing Options You’ll Choose Between
- Standing-seam steel: the premium choice. Concealed fasteners, clean vertical lines, strong wind performance. Highest cost, longest service life, best suited to a home you plan to keep.
- Exposed-fastener metal panels (screw-down): lower cost per square, faster to install, good on simple rooflines. Fastener gaskets need periodic checks, so this suits budget-conscious buyers and outbuildings.
- Stone-coated steel: metal core with a stone granule finish that mimics tile or shake. Mid-range price, quieter under rain, popular where HOA rules restrict bare metal.
- Panel gauge and finish: thicker steel resists hail dents better; a quality paint finish holds color longer in Texas sun. This is where cheap metal shows its age first.
- Color and trim: a wide palette now available, but HOA approval in your subdivision may narrow it. Decide early, since it affects the order.
Homeowners often pair this with Impact Windows & Doors in Irving when they’re hardening the whole envelope at once.
What Metal Roofing Costs in Irving, TX
Metal roof installation in Irving lands in the $15,000 – $40,000 range for most homes. What pushes a job to the low or high end:
- Roof size and complexity: more square footage and more hips, valleys and dormers mean more panels, more flashing and more labor.
- Deck condition: soft sheathing discovered at tear-off adds repair cost.
- Panel type: standing-seam steel sits at the top; screw-down panels sit lower.
- Gauge and finish grade: heavier steel and premium finishes raise the number.
- Permit scope and any structural prep: older Irving homes occasionally need deck reinforcement before a heavier metal roof goes on.
Your written estimate states what’s included: tear-off, deck repair allowance, underlayment, panels, flashing, permit and cleanup. Items like rotten fascia or attic ventilation upgrades are called out separately so nothing surprises you mid-job. Our upfront pricing means the number you see is the number you pay. Call (844) 797-4808 for an exact quote.
See the difference
Before
After
Before
After
Before
AfterWhat Irving Homes Specifically Do to This Job
Irving is really two construction markets split along the SH-114 corridor. In the older core around the Hospital District and South Irving (75062), we work on 1950s – 1970s brick-veneer ranches where the deck and framing are original. On those lots, a heavier metal system sometimes needs a deck and rafter check before install, and we flag it during the estimate rather than after the tear-off. Out toward Las Colinas, Valley Ranch and the 75063 corridor, we see 1980s – 2000s subdivision homes and denser multifamily where HOA approval and panel color rules matter, so we confirm those early. The black-clay soils that swell and shrink across North Texas also mean we watch for sagging or out-of-level decking tied to foundation movement, and summertime installs run on early-morning schedules to beat the heat. If your metal roof is part of a full Roofing in Irving project, we scope it together.
Serving Irving, TX – Our Local Coverage Area
We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Metal Roofing in Irving
Most single-family metal roofing in Irving takes 3 – 6 days on site, plus a 1 – 3 week permit and panel-order lead time before install. Call (844) 797-4808 to schedule a free estimate and get a firm timeline.
Yes, residential re-roofing in Irving requires a permit and a final inspection, and metal systems need to meet wind-uplift specs. We pull the permit and handle the inspection so you don’t chase paperwork. Call for details.
Usually yes, since metal roofing weighs in a similar range to asphalt once you account for the system. But older Irving homes with weathered decking sometimes need reinforcement, which we identify at the estimate. Call to schedule a walkthrough.
Metal roof installation in Irving runs $15,000 – $40,000 depending on size, panel type and deck condition. Call (844) 797-4808 for an exact quote – estimates are free.
Panels and finishes carry the manufacturer’s material warranty, and the installation is covered by our 730-Day Done Right Promise. Materials and workmanship are backed in writing. Call to review the details before you sign.
Get a Free Metal Roofing Estimate in Irving
Ready to price metal roofing for your Irving home? Call (844) 797-4808 and a live person answers around the clock. We’ll set a free on-site estimate, walk the roof with you, and hand you a written line-item quote with the 730-Day Done Right Promise behind it. For the wider project, see our Roofing service and our Irving service area.
Written by the team at Groundwork Construction Co.